The Cm-1 Communication System In Everyday Use; At A Presentation - HumanTechnik cm-1 Instrucciones De Servicio

The CM-1 communication system in everyday use

You can influence the tone of the sound transmitted by varying the
tone pattern on the HI/LO selector switch: the HI position accen-
tuates the transmission of the treble tones.

At a presentation

1. Set your hearing aid to "T" or "MT" in order to transmit sound information direct-
ly to the T-coil in your hearing aid via the teleloop, or connect a headset to a
CM-1 receiver.
2. Slide the mode selector switch to the Omni position.
3. Position your CM-1 transmitter as centrally as possible, e.g. on the conference
table.
4. Use the fold-out stand to raise the microphone unit somewhat and to mecha-
nically dampen jolting noises from the surface of the table.
5. Switch the CM-1 transmitter and CM-1 receiver on at the on/off switch.
6. Adjust the transmission volume to a comfortable level by setting the volume
controller on your CM-1 receiver to an appropriate level.
→ You are seated in groups around a number
of tables in a presentation room, for example.
→ Sound is distributed evenly throughout the
room via a loudspeaker system.
→ Occasional questions are put to the speaker
from people seated at the groups of tables.
→ Use "Omni" transmision mode.
English 35