Troubleshooting - Rimax RB205 Manual De Instrucciones

Press [ ] again, Ch2 Paired will appear in the monitor screen. This means
that the CH2 has been successfully paired. See below picture:
To select the EXIT and press [
monitor unit.
5. Repeat steps 1-4 to pair Ch3 and Ch4.

Troubleshooting

If you are not getting any signal at all:
Make sure the camera and the monitor are turned on.

Make sure the power plugs are pushed all the way in.

Check that the channel on the camera and the monitor are set to the same

number.
Recording or shooting does not work:
 Insert SD card in SD card slot
 Unlock the SD card
] once more to return to the screen of the
35