Rimax RB205 Manual De Instrucciones página 24

Placement Type
Raise the hanging buckle (as shown in Figure 3)
and then rotate the lock to fix it.
Installation Instructions
Camera Unit System
1. Connect one end of the
transformer to the camera unit system
(as shown in Figure 4) and
connect the other end of the
transformer to the power supply.
2. Press ON/OFF button to start
the camera unit system.
Placement Type
Stand Type:
Wall Mount Type:
Magic Belt Type:
The stand can be placed on 4 angles (i.e., front, rear,
right and left), adjust the desired angle and position.
Fix a screw into the wall and leave a distance about
9mm away from the wall. Hang the camera unit
system.
Put the magic belt through the camera unit system
base and tie it to the cylinder.
(Note: it cannot be tied to the crib).
24
Figure3
Figure 4