Manual Flash Exposure Correction In Ttl Flash Mode; Remote Slave Flash Mode; 26Af-2 Canon - Metz mecablitz 26 AF-2 Manual De Instrucciones

5.3 Manual flash exposure correction in TTL flash mode

This function must be set on the camera, see the camera
user manual.
The auto flash exposure mode of most cameras is
adjusted to a reflection factor of 25% (the average
reflection factor of flash subjects).
A dark background that absorbs much of the light or a
highly reflective bright background (backlit shots,
for example) may result in, respectively, underexposure
or overexposure of the subject.
To offset these effects, the flash exposure can be
adjusted manually for the shot with a correction value.
The extent of the correction depends on the contrast
between the subject and background!
Tip:
Dark subject against light background: positive
correction factor.
Light subject against dark background: negative
correction factor.
Exposure correction by means of alteration of the lens
aperture setting is impossible, since the camera's
automatic exposure program regards the altered aper-
ture setting as the normal working aperture setting.
When setting the correction factor, the distance shown
in the display can change and be adjusted to the
correction factor (depending on the camera model)!
After the shot, remember to cancel the TTL flash
exposure correction in the camera!
Strongly reflecting objects in the motif can have a
negative impact on the camera's automatic exposure.
The photograph will be underexposed. Remove
reflecting objects or set a positive correction value.

5.4 Remote slave flash mode

Applicable to all versions:
The slave flash units must be able to receive the light
from the master or controller flash unit with the
integrated slave sensors
group and the remote channel on the camera, the
master or the controller flash unit.

5.4.1 26AF-2 Canon

The flash unit supports Canon`s wireless E TTL Remote
System in slave flash mode (set on the camera if
possible).
Wireless remote control of one or more slave flash units
by one master or controller flash unit on the camera
(for example, mecablitz 64AF-1 digital Canon) or by the
camera master (depending on the camera type) is thus
possible
for the remote mode. Set the
k
95