RHOSS ELECTA Serie Instrucciones De Uso página 300

EN
1.7 CONFIGURATION OF THE DHW PRIORITY SCHEDULE
Menù Par Label Description
label
Start DHW priority period:
124 OmP The time of day that DHW production has priority over air conditio-
ning
SAm1
End DHW priority period:
125 OFFP The time of day until DHW production has priority over air conditio-
ning
1.8 CONFIGURATION OF THE ANTI-LEGIONELLA FUNCTION
Menù Par Label Description
label
DHW heat treatment start frequency (anti-legionella)
133 CYCA The time interval, in days, that the anti-legionella treatment will be
carried out at. At 0, the function is disabled
134 SEtA DHW heat treatment set point (anti-legionella)
SAni
DHW heat treatment start period (anti-legionella) The minimum
135 tiMA continuous amount of time that the water temperature in the storage
tank stays above the set point value
136 HOUA DHW heat treatment start time (anti-legionella)
In detail:
• CYCA: Number of consecutive days, without any anti-legionella treatment, after which point a forced treatment is run.
• SEtA: Temperature in the storage tank, above which the anti-legionella treatment is considered as having been carried out (par.112 > par.134).
• tiMA: Minimum continuous time, that the above condition lasts for (par.112 > par.134), after which point the anti-legionella treatment is conside-
red as having been carried out.
• HOUA: Time of day that the forced treatment is carried out.
Forced treatment means switching on the electric resistor, so that par.112 > par.134, for an amount of time equal to par.135.
treatment starts from zero again.
Enclosed documents
300
U.m. Range
max Default t
min
h:
00:00 23:59 00:00
min
h:
00:00 23:59 23:59
min
U.m. Range
max Default t
min
day 0 30 0
°C 50 70 60
min 1 30 15
h:
00:00 23:59 02:00
min
Correct Address
16397
16398
Correct Address
16405
16406
16407
16408