Spec -Special Functions - Futurelight MH-420 Manual Del Usuario

"P.End." - a total number of the program steps,value 1-99 .This value you must set before start
programming(e.g. if you want to create program with the 10 steps,set the value onto 10).
"PAn" - a pan,value 0-255
"tilt" - a tilt,value 0-255
"F.PAn" - a fine pan, value 0-255
"F.tilt" - a fine tilt,value 0-255
"SPEd" - a speed of PAN/TILT movement,value 0-255
"Colo" - a colour, value 0-255
"S.Gob." - a satic gobowheel,value 0-255
"Stro." - a strobe,value 0-255
"dimr" - a dimmer, value 0-255
"S.tim." - a step time,value 0,1-25,5 seconds
"F.tim." - a fade time,value 0,1-25,5 seconds
"COPY." - a copying the current prog. step to the next prog. step .If the last prog.step is copied to the
next prog. step, parameter "P.End" is increased about 1 by itself (except step 99).
5. Press Enter]-button to confirm adjusted value .
6. Press [Mode]-button,select next prog. step and repeat this procedure (steps 4 and 6).
The editing programs "PrG.1, PrG.2, PrG.3" are saved in the current modified fixture (master or slave1-9).
- Reset Function
Press [Enter] key to run reset. This option enables the MH-660 to index all effects (functions) and return to
their standard positions.

SPEC -Special functions

Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing
[Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]
keys to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the
menu.
Lamp adjustment
-
This function can be used when you make the fine adjustment of the lamp.If you select "LAAd" pressing by
[Enter]-button ,all effects will be canceled,shutter will be opened and the dimmer intensity will be set onto
100%. By using the options "PAn, tilt, Foc" you can focus the light on a flat surface (wall) and perform the
fine lamp adjustment.
61