Using Separately Sold Interactive White Board Kit For The Projector - NEC NP01SW Serie Manual De Instalación

5-2. Using separately sold Interactive White Board Kit for
the projector
Connect the receiver box included with the NP01SW2.
IMPORTANT
• For utilizing the Interactive White Board Kit function, switch the receiver box's USB-A/USB-B
"
selector switch to
HDBaseT port
LAN cable (commercially available)
Connect to a power outlet
HDMI cable (commercially available)
NOTE
• The USB Display function is unavailable when the Interactive White Board Kit (sold separately)
is connected.
• Please connect the USB cable to the USB-B port on the projector for using the stylus pen
which controlled by the IWB software installed computer connecting with the projector that
has the built-in interactive white board function as NP-UM352W.
In this case, add check mark to REMOTE PEN for the PEN SETTINGS on the projector's
APPS menu.
"
USB-A before connecting the cable.
RS-232C cable (included)
Receiver box
HDMI cable (included)
HDMI1 input terminal
ENG-21
PC CONTROL terminal
HDMI input terminal
USB cable (included with
camera unit)
USB cable (commercially available)
USB-B port on cam-
era unit
USB-B port