Maintenance & Adjustments; Maintenance Schedule - Cub Cadet SLTX1054 Manual De Operación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance & Adjustments
6
MaintenanceSchedule
Before
Every
Every
Every
Every
Eachuse
10 Hours
25 Hours
50 Hours
100 Hours
Prior
to Storing
,/
CleanHood/Dash Louvers
M/
Check Engine Oil Level
M/
Check Air Filterfor Dirty,Looseor Damaged Parts
_"
CleanandRe-oilAir Filter'sFoamPrecleaner
_/
Replace Air Filter Element
M/
ChangeEngineOiland Replace Oil Filter
M/
CleanBattery Terminals
_/
_/
LubeFrontAxlesand Rims
_/
_/
CleanEngineCoolingFins
M/
M/
LubeFrontDeckWheels
_/
_/
LubeDeck Spindles
_/
_/
LubePedalPivot Points
_/
_/
Check SparkPlugCondition&Gap
_/
_/
Replace FuelFilter
_/
Maintenance
Engine
WARNING!
Before performing
any maintenance
or
repairs, disengage
PTO, set parking
brake, stop
engine
and remove
key to prevent
unintended
starting.
Refer to the Kohler Owner's
Manual for all engine
maintenance
procedures
and instructions.
NOTE: Maintenance,
repair, or replacement
of the emission
control
devices and systems which are being done at owner's
expense
may be performed
by any engine repair establishment
or individual.
Warranty
repairs must be performed
by a Cub
Cadet Dealer.
Changing the Engine Oil
_
ARNING!
If the engine
has been recently
run, the
engine,
muffler
and surrounding
metal surfaces will
be hot and can cause burns to the skin. Exercise
caution
to avoid burns.
NOTE:The
oil filter should
be changed
at every oil change
interval.
To complete
an oil change,
proceed as follows:
1.
Run the engine for a few minutes
to allow the oil in the
crankcase to warm up. Warm oil will flow more freely and
carry away more of the engine sediment
which may have
settled
at the bottom
of the crankcase. Use care to avoid
burns from hot oil.
2.
Open the tractor's hood and locate the oil drain port on the
right side of the engine.
19
Tabla de contenido
loading

Tabla de contenido