Initial Setup - Seiki SE20HY Manual Del Usuario

Initial Setup
• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV wilt enter Standby Mode and the red
LED indicator wilt illuminate.
• In Standby Mode, press the (D button on the main unit or on the remote control to
turn the TV on. The red LED indicator will turn blue.
• The first time you turn the TV on, it wilt go into the Setup Wizard. Press 4/1_
A/V buttons to select your desired mode and press OK to confirm.
0 0 0
0 0
Home Mode (Energy Saving) is the default as-shipped television configuration and
settings. And Home Mode (Energy Saving) is the setting in which the
product qualifies for ENERGY STAR. Any changes to default as-shipped television
configuration and settings would change the energy consumption. And enabling
certain optional features and functionalities may increase energy consumption
beyond the limits required for ENERGY STAR quafification, as applicable.
Retail Mode : Select Retail Mode if you would fike your picture to be brighter. At
times this mode may use more energy to operate the Volume/Sound Mode and the
Picture Mode. In this setting, the power consumption may possibly exceed the limited
requirement of the ENERGY STAR@qualification.
ENERGY STAR @ is a set of power-saving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
ENERGY STAR @ is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the
environment through energy efficient products and pratiees.
• The ON-MODE Power under Home Mode should be less
than 21.2 W.
• The SLEEP-MODE Power should be less than 0.5 W.
0
_ 10