OVERVIEW TABLE "TROUBLESHOOTING"
Problem
The upper LED on
the remote lights up/
flashes yellow.
The white LEDs on the
remote flash.
The remote cannot be
switched on.
The battery cannot
be inserted into the
drivepack. It does not
lock into the battery
compartment.
The pedal support
suddenly fails during
the ride
| evation
possible Reason / Solution
There may be a bad connection between the speed
sensor and the bottom bracket.
► Check the position of the spoke magnet.
If you cannot find a fault, contact a Fazua
Servicepartner.
Software update
► After a new firmware update, the remote is
updated automatically. In this case, please wait
and do not switch off the remote until the LEDs
stop flashing.
The battery is flat or has switched off due to a longer
rest period (standstill).
► Try turning on the battery using the on/off button.
► Charge the battery if necessary.
The interface between the battery and the drivepack
may be dirty.
► Clean the interface between the battery and the
drivepack.
The interface between the battery and the drivepack
may be dirty.
► Clean the interface between the battery and the
drivepack.
BMS protection function
► Turn off the battery by pressing the on/off button
for 3 seconds and then turn it on again.
- 45 -
EN-37