► Use the "Pushing support" function only when pushing the
e-bike. While the pushing support is activated, you must hold
the e-bike securely with both hands and the wheels must be
in contact with the ground, otherwise there is a risk of injury.
Risk of burns!
The radiator in the drivepack can become very hot during
operation so that you can burn yourself on it.
► Be careful when handling the drivepack.
► Allow the drivepack to cool down completely before touching
the drivepack.
Risk of damage!
Improper handling can damage the drive system or individual
components.
► Have individual components of the drive system and the
e-bike replaced exclusively by identical components or other
components expressly approved by the e-bike manufacturer.
This will protect the other components or your e-bike from
possible damage.
► Never use your e-bike without a drivepack or without a
downtube cover if you use it as a conventional bicycle
without a drivepack.
► Remove the battery before cleaning the drivepack and
allow all components to dry completely before inserting.
If the battery comes into contact with damp or wet contacts on
the drivepack during insertion, the battery may be damaged.
► When charging the battery, make sure that the mains cable
and charging cable of the charger are not trip hazards in order
to prevent components from being damaged, e.g. by a fall.
| evation
WARNING
NOTICE
- 27 -
EN-19