Technical Characteristics - Cardin Elettronica PL Serie Manual Del Usuario

CHARACTERISTICS AND PARTS DESCRIPTION
PARK is a completely "wireless" and remote controlled automation system made entirely of stainless steel and powered by a
solar panel*, which permits you to safeguard your parking space from abusive parking.
Being equipped with an obstacle detection system in both movement directions and a reversible gearmotor that permits it to
be manually operated (in the event of voluntary release, flat or failed battery), this system is in compliance with the present
safety standards.
*An externally powered wire controlled version of the product is available on request (600/PARKLINE).
IMPORTANT: read this manual carefully in all its parts prior to installation.
You will find that installation of the product is simple if the illustrated sequence is followed in its various steps.
Description of components (fig.1)
1) I ndicators LED
2) Motorised arch
3) Solar panel (mod. PARKSUN)
4) Motor
5) Electronic control unit
6) Release and opening keys
7) Rechargeable battery
8) Protective glass (mod. PARKSUN)
9) Lid (mod. PARKSUN)
10) Lid (mod. PARKLINE)
11) Fixing holes
12) Water drainage holes

TECHNICAL CHARACTERISTICS

Power supply
Battery
Panel power
Consumption in standby mode
Motor consumption
Encoder
Working temperature
Radio frequency
Protection level
Weight
FIXING
Delicately remove the product from its packaging. Lift the PARK cover by turning the supplied key anti-clockwise in the central
lock. Check that all internal parts are intact.
Define the position of the product within the parking space and follow the instructions of the diagrams below (Fig.3).
Mark the fixing points on the ground using the PARK as a template. Drill the holes with a 10 mm drill bit.
Insert the metal anchors into the holes that have just been drilled, place the PARK in position, making sure that the holes
coincide with the metal anchors, and fix PARK with the supplied metal anchor in a criss-cross sequence.
- Don't seal in any way the PARK structure. It's projected to flow the water away in case of intensive rain (part 12
Fig.1).
U.M. 600/PARKSUN
V
V/Ah
W
mA
A
°C
MHz
IP
Kg
13) F1 Pushbutton for Programming
14) Pushbutton F2 and saving remote control
handsets
15) Programming led LD1
16) JP3 Jumper for stroke modification
17) Radio antenna
18) Remote control codes memory (Noire only)
19) Jumper for Rolling C
codes)
20) Terminal board for hard wired connection of
controls
21) JP1 for selection of wired control mode
22) Power supply fuse 12V 1A
23) Control unit reset
24) Antenna connection terminal block
12 dc
12 / 7
5
1
1
Si
-20 +55
433.92
54
23
ode selection (only for Noire
600/PARKLINE
/
GB
19