Battery Check; System Setup - Baxtran STA Serie Manual De Usuario

STA/STR/STC
To balance between accuracy and measurement speed in high resolution mode,
be changed to fit your measurement application.
To learn how to set Anti-Motion Level, please refer to the Anti-Motion Level in 6 Advanced Ope-
ration section.
CONDITION
The scale must not be in
NOTICE:
High resolution offers better accuracy at the cost of longer measuring time and stricter
requirement of load's stability. Designed to meet the OIML R76's directive, this scale has
the best (default) performance at 2000 to 3000 division.
NOTICE:
RESOLUTION SWITCHING will change the apparent overloading range of the scale. For
example, if the resolution of a 3000kg scale is switched to 0.5kg, it will overload at a new
weight of 3004.5kg (3000 + 9*0.5), while by default, it overloads at a weight of 3009kg
(3000 + 9*1).
NOTICE:
The default resolution will be restored next time when the scale is powered on or enter
System Setup Mode (no matter the setting is changed or not). To save the changes in reso-
lution for later, use SYSTEM SETUP function, rather than RESOLUTION SWITCHING.

BATTERY CHECK

ACTION
To check scale's battery power, press
FUNCTION
System checks the battery, and feedbacks with battery's left charge.
The screen flashes the battery charge in voltage, like the below 6.42V.
Please flip to 7 Battery section for more information about battery.
CONDITION
The scale must not be in

SYSTEM SETUP

ACTION
To enter system setup
in turn.
To input digits, press
To confirm the password or input value, press
To save and exit system setup
To exit system setup mode
ller.
To learn how to input digits or change the option, please refer to 5 User Input section..
FUNCTION
HOLD mode. Otherwise, error message
and
HOLD
mode. Otherwise, error message
mode, press 2ND and
ZERO and TARE button on scale or
mode, press 2ND
without saving, press
F1 on remote controller in turn.
HOLD button on scale or
and
HOLD button on scale or
button on scale for
ON/OFF button on scale or
User's Guide
anti-motion level
will keep flashing.
will keep flashing.
and on remote controller
on remote controller.
on remote controller.
on remote controller.
on remote contro-
can
45