Gross/Net Mode; View Total Mode; Idle Mode; 2Nd Mode - Baxtran STA Serie Manual De Usuario

STA/STR/STC

GROSS/NET MODE

ACCIÓN
To enter net mode,
To enter gross mode, tare out the scale.
FUNCTION
In net mode, the
gross mode, the
In
The default weight reading is in
NOTICE:
In NET MODE, ZERO are disabled.

VIEW TOTAL MODE

ACTION
To enter the view total
To toggle between the low 5 digits format and the high 5 digits format, press HOLD button on scale or
on remote controller.
FUNCTION
In view total mode, the weight reading keeps flashing to distinguish itself from that in
mode.
Apparently, TOTAL
is not able to display correctly. The
and the high 5 digits format.
For example, the totalized weight reading "129235.0" will be displayed "9235.0" as its low 5 digits
format, like below:
The high 5 digits format of "29235.0" is like below.
To learn more about View Total, please refer to View Total in 6 Advanced Operation section.
NOTICE:
All other functions are disabled in VIEW TOTAL MODE

IDLE MODE

ACTION
No buttons or keys are required to enter the
FUNCTION
In idle mode, the screen dims its brightness to save battery power. Except for this power-saving featu-
re, all the operations are the same as in other modes..
To learn how to configure Idle Mode, please refer to Idle Timing of System Setup in 6Advanced
Operation section.
NOTICE:
Any buttons on scale or keys on remote controller will wake the scale up from its IDLE
MODE, light the screen up in result.

2ND MODE

ACTION
2nd
To enter the
tare or tare set the scale
TARE indicator lights on.
TARE
indicator lights off.
gross mode.
F1
mode, press
is the sum of history weight readings, which can be so great that the 5 digits screen
TOTAL
mode, press 2ND
button on scale or
when scale is in eighing
is therefore divided into two parts, the low 5 digits format,
idle mode.
on remote controller, when scale is in
mode.
User's Guide
weighing
41