Playing Messages - Olympia MEMO 99II Manual De Instrucciones

Press the RECORD/STOP button,
the recording icon lights up and the
time indicator for the current recor-
ding appears. The LED lights up
red. Speak into the microphone in-
tegrated or connect an external mi-
crophone to the MIC jack. The de-
vice begins to record the moment you start to speak. If recording is
interrupted, the red LED flashes until recording is resumed. Press the RE-
CORD/STOP button again to end recording.
NOTE:
S
The first noise activates the recorder and it is possible it will not be
recorded.
S
The device does not interrupt recording should the volume of the speaker
change.
S
Recording is interrupted following 2 seconds silence.
S
For information on continuous recording, refer to Page 33.
S
A distance of approx. 10 cm from the device is considered reasonable for
recording at a normal volume (speaking).

Playing messages

Switch the device on, activate
Standby mode and press the FILE/
REPEAT button to select a file (A,
B, C, D).
Press the UP or DOWN button to
select the required messages. The
message number and length ap-
pear in the display.
Operation
A
B
C
D
GB
35