Activating/Deactivating The Vox Feature (Voice Detection); Recording - Olympia MEMO 99II Manual De Instrucciones

Activating/Deactivating the VOX feature (voice detection)

To activate/deactivate VOX",
press and hold the MODE button
until SET" appears in the display.
Press the UP or DOWN button un-
til VOX" appears in the display.
Use the FORWARD or BACK but-
ton to switch the VOX" function on
or off. Confirm the setting by pressing the PLAY/STOP button.

Recording

14
The device is equipped with an automatic voice activity detector (VOX) (refer
to Page 34 Voice activity detector (VOX)"). If VOX" is deactivated (see
above), you can record in the normal way.
Set the device to Standby mode
and select the recording quality re-
quired (refer to Page 30 Recor-
ding quality").
Select a file/memory location by
pressing the FILE/REPEAT button
(refer to Page 31 Managing mes-
sages").
If you remove the batteries while recording, the recording
is interrupted. The current recording may be impaired or erased.
The dictation machine requires a few minutes to be able to start re-
cording again in normal operation. ......" appears in the display du-
ring this period.
It is recommended to save your recordings on a PC or external data
media.
Operation
A
B
C
D
GB
33