Voltage Commutation; Before First Use; Operation; Cleaning And Care - Unold Curly Traveller 87405 Manual De Instrucciones

Voltage commutatIon

Before connecting the appliance please check if the voltage selector is adjusted to the right voltage
(120/230-240 V~). To change the selection a coin may be used.

beFore FIrSt uSe

1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. After washing your hair, dry it thoroughly
with a towel.

oPeratIon

1. Prepare your hair as described in the chapter
„Before first use".
2. Attach the curling brush firmly to the
appliance until it latches into place.
3. Connect the plug to a wall socket.
4. Separate the combed hair into strands no
more than 5 cm wide. If necessary, separate
the strands using hair clips.
5. Wrap the hair strands around the curling
brush from the end to the hairline. In order
not to entangle the hair it should not be
wrapped around the brush more than twice.
6. Switch the appliance on using the EIN/AUS
(ON/OFF) switch and select the desired
temperature. The following settings may be
selected:
0 = off
cool air setting to fix styling
=
1 = soft warm air stream for easy styling
2 = strong air stream for fast styling and
drying
7. Leave the strand wrapped up until it feels
warm.

cleanIng anD care

1. Unplug the appliance from the wall socket.
2. Leave the appliance and the curling brush
to cool off completely putting it on a heat
resistant surface.
3. Never immerse the appliance or the lead
cable in water or other liquids to clean them.
4. Clean the appliance with a damp cloth.
5. Do not use
abrasive agents, steel wool, metal objects,
12
any scrubbing sponges,
3. Best results are achieved with dry hair.
Therefore you should dry your hair well
using a hair dryer, if necessary.
4. Brush your hair until it falls loosely.
8. The strand achieves more hold if you fix the
styling using the cool shot.
9. Press the unroll button to easily unwrap the
strand.
10. Unwrap the strand carefully to separate it
from the appliance as the brush now moves
freely.
11. Repeat steps 5 to 10 to style the remaining
strands.
12. Always switch the appliance off using
the EIN/AUS (ON/OFF) switch before
disconnecting the plug from the wall socket.
13. Before styling your hair with a comb, a
brush or your fingers, let it cool for a while.
14. Please remember that the curling brush is
very hot after use. Danger of burns!
attention: the appliance becomes very
hot during operation and maintains
the heat during some time after
disconnection.
disinfectants or hot cleaning agents, since
they can damage the appliance.
6. Protect the appliance from dust and clean
the air inlets with a soft brush, if necessary.
7. Clean the curling brush with a damp cloth,
if necessary.
8. Let the curling brush dry completely before
using it again or storing it.