Product Description And Specifications - Bosch GSR 10,8-LI Professional Manual Original

OBJ_BUCH-1010-005.book Page 13 Thursday, January 15, 2015 11:27 AM
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Locking sleeve
4 Torque presetting ring
5 Gear selector
6 Battery unlocking button*
7 Battery pack*
8 Rotational direction switch
9 On/Off switch
10 "PowerLight"
11 Handle (insulated gripping surface)
12 Drill bit with hexagon shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Bosch Power Tools
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a <2,5 m/s , K =1,5 m/s
h
2
Screwdriving: a <2,5 m/s , K =1,5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Weight according to
EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
– during operation **
and during
storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2004/108/EC, 2006/42/EC
including their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-2.
English | 13
2
,
2
.
GSR 10,8-LI
3 601 J92 9..
V= 10,8
-1
min 0 – 400
-1
min 0 – 1300
Nm 30/15*
mm 10
mm 19
mm 7
kg 0,8
°C 0...+45
°C -20...+50
GBA 10,8 V...
AL 11..
°C
1 609 92A 0WN | (15.1.15)