Cvbs (& S-Video) Mode - Comelit 41637 Instrucciones De Montaje Y Servicio

5.2 CVBS (& S-Video) Mode
Press the MENU button to display the Main Menu Settings. The follow setup menu appears.
Main menu
Volume
Contrast
Brightness
Color
Tint
Sharpness
Advanced
OSD Menu
Source
• Volume, Contrast, Brightness
Change the Volume, contrast & brightness according to personal preference.
• Color
Used to minutely adjust colour
• Tint
Adjusts all the colours on the screen, but is most noticeable to the eye in reds and yellows, and is also usually set
for pleasing face tones. (Appears in NTSC mode only).
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Advanced Menu
Advanced
Under scan
Anti Burn
TNR strength
Filter
L/L Mode
Color
Dynamic Contrast
Color Temp
Recall
0
64
68
+64
0
+6
CVBS1
Under Scan adjusts the image size. (ON/OFF)
Anti Burn: This is to prevent the pixel burn on LCD after the use of
OFF
display for a long time.
OFF
You can turn it on in normal mode or Underscan mode.
Mid
ON
– ON in normal mode: 55minutes (normal screen) –> 5minutes
OFF
– On in underscan mode: 55minutes (underscan screen) –> 5minutes
No
TNR (Temporal Noisy Reduction) strength is activate this feature to
reduce any noisy signal that may appear on the screen.
(LOW / Mid / High)
Filter is used enable or disable the Luminance Filter function
L/L Mode choose ON/OFF function reinforce the L/L (line Lock) function
NOTE: It is recommended to use this function if there are some
Color is select picture Color level (Neutral / VIVID / Individual)
(underscan screen) –> 55minutes (normal screen).
Automatically being iterating.
(normal screen) –> 55minutes (underscan screen).
Automatically being iterating.
twisting vertical line with Line-Lock camera.
22