Tabla de contenido
Idiomas disponibles
Idiomas disponibles
[o_o)_l
KNOW YOUR
SNOW THROWER
READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR
SNOW THROWER.
Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Speed Shifter Lever _
Lever
Auger Drive Lever
Traction Drive Lever
Chute
Deflector
Choke
Control
Gas
Primer
Cap
Bu_on
Discharge
Chute
Safety
Key
Recoil
Starter
Handle
Electric
Start
Stop
Button
Switch
Height Adjust Skid
Shear Pin
Scraper Bar
Figure 14
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly
- Changes the direc-
tion of snow throwing through the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Safety Key - Must be inserted to start
the engine.
F 0410110L
12
Recoil Starter Handle - Starts the en-
gine manually.
Choke Control
- Used to start a cold
engine.
Primer Button
- Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far.
Pull remote lever back to discharge snow
down.
Electric Start Button
- (if so equipped)
Used to startthe engine using the 120V elec-
tric starter,
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
ing.
Toolbox
- spare shear pins and
spacers are located in toolbox.
Tabla de contenido
