Overhead Rigging - Briteq Club Laser 7 MK2 Manual De Instrucciones

ENGLISH
23. WARNING LABEL: "Caution – Class 3B laser. Laser Radiation when open. Avoid exposure to beam."
24. WARNING LABEL: "Laser Radiation. Avoid exposure to beam. Class 3B laser product"
25. LASER WARNING SIGN: warns against a potentially dangerous laser when not used by skilled
operators.
26. WARNING LABEL: "Laser Aperture"

OVERHEAD RIGGING

 Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
 Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
 The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
 Before rigging make sure that the installation area can hold a minimum point load of 10times the device's
weight.
 Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
 The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
 Don't cover any ventilation openings as this may result in overheating.
 The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
CAUTION EYEDAMAGE: Always position the laser in a way that prevents the
audience from looking directly into the laser beams. The installation should assure that
the beam will not strike the audience.
HOW TO SET UP AND CONTROL THE UNIT
 Regular breaks during operation are essential to maximize the life of this device as it is not designed for
continual use.
 Do not switch the unit on and off in short time intervals as this reduces the lifetime of the lasers.
 Always unplug the unit when it is not used for a longer time.
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 Important: Never look directly into the laser beam! Don't use the effect in the presence of persons
suffering from epilepsy.
Pattern X/Y mirror control setup:
See also point n°16 in the description.
 Press the FUNC-button until the display shows one
of the 4 displays on the right.
 Press the UP / DOWN buttons to choose one of the
four mirror options:
 UP-button: mirror projection along X-axis
 DOWN-button: mirror projection along Y-axis
 Press the ENTER-button to confirm your choice.
(display blinks "888" 3times)
You can operate the unit in 5 ways:
1) MUSIC CONTROLLED MODE (MASTER):
The laser runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1 laser
is used (standalone) or when the laser is placed as the first (master) unit in a chain with several Club
laser7 Mk2 lasers.
BRITEQ
®
USER MANUAL
5/70 CLUB LASER 7 Mk2
ENGLISH
 Press the FUNC-button until the display shows A1, A2, S1 or S2
 Press the UP / DOWN buttons to choose one of the two music controlled shows: S1 or S2
 S1: Ever-changing, music controlled RANDOM show
 S2: PREPROGRAMMED, music controlled show
 Press the ENTER-button to confirm your choice. (display blinks "888" 3times)
 Put on some music and adjust the MUSIC SENSITIVITY-knob (9) until the laser works
nicely to the rhythm of the music.
You can connect several CLUB LASER7 MK2 lasers together: just put the first unit of the chain in "Music
mode" and all other units in "Slave mode" to make them all work in perfect sync!
Note: When no music is detected, the laser output will be shut off (blackout).
2) FULL AUTOMATIC MODE (MASTER):
The laser automatically runs a preprogrammed sequence. Select this mode when only 1 laser is used
(standalone) or when the laser is placed as the first (master) unit in a chain with several Club laser7 Mk2
lasers.
 Press the FUNC-button until the display shows A1, A2, S1 or S2
 Press the UP / DOWN buttons to choose one of the two automatic shows: A1 or A2
 S1: Ever-changing, automatic RANDOM show
 S2: PREPROGRAMMED, automatic show
 Press the ENTER-button to confirm your choice. (display blinks "888" 3times)
The laser automatically runs a preprogrammed sequence.
You can connect several CLUB LASER7 MK2 lasers together. Please put the first unit of the chain in
"Automatic mode" and all other units in "Slave mode" to make them all work in perfect sync!
3) SLAVE MODE:
The laser follows the instructions given by the first Club laser7 Mk2 laser (master) in the chain.
 Connect the DMX input of the laser to the DMX output of the previous laser in the chain.
 Press the FUNC-button until the display shows "SLA"
 Press the ENTER-button to confirm your choice. (display blinks "888" 3times)
You can connect several CLUB LASER7 MK2 lasers together. Please put the first unit of the chain in
"Music or automatic mode" and all other units in "Slave mode" to make them all work in perfect sync!
4) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:
 1 CHANNEL MODE: for extremely easy setup and use! (display shows "1Ch")
 17 CHANNEL MODE: for full control of all possibilities. (display shows "17C")
 Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
 Press the FUNC-button until the display shows: "1Ch" or "17C".
 Press the UP/DOWN buttons to select the desired DMX-mode. (1Ch or 17C)
 Press the ENTER-button to confirm your choice.
 Press the FUNC-button until the display shows a 3 digit number
 Press the UP / DOWN buttons to choose the desired DMX-address (from 001 to 511)
 Press the ENTER-button to confirm your choice. (display blinks "888" 3times)
The Club laser7 Mk2 laser uses 17 channels, please refer to the DMX-chart below for the functions of the
different channels.
BRITEQ
®
USER MANUAL
6/70 CLUB LASER 7 Mk2