Bluetooth Operation; Recording Function - Roadstar HRA-1782D+BT Manual De Instrucciones

5 English
will be shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (10) (9 on remote) to start program play.
7. Press STOP (12) (6 on remote) once to stop the program play. Press STOP (12)
(6 on remote) twice to clear programme.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device
like MP3 players, CD players and allow playback of your external source through the
system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end of the ca-
ble. Plug one end into the AUX-IN (18) on the main unit and plug the other end of
the cable into the LINE OUT or HEADPHONE Jack of your external audio device.
2. Turn ON the unit and your external audio device. Rotate SOURCE (4) (5 on remo-
te) to select CD mode.
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Rotate SOURCE (4) (5 on remote) to select BT mode.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged
as HRA-1782D+BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HRA-1782D+BT and all operations can
only be operated from your mobile device.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket (5).
2. Rotate SOURCE (4) (5 on remote) to select USB mode.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.
DELETE USB
1. During playback, press and hold DEL (11) (4 on remote). "DEL" will be shown on
the display.
2. Press SKIP -/+ (8/9) (12/13 on remote) repeatedly to select between ONE/
FOLDER/ALL.
3. Press DEL (11) (4 on remote) again to confirm.

RECORDING FUNCTION

While listening to BLUETOOTH/AUX-IN/DAB:
1. Press REC (11) (3 on remote). "REC" will be shown on the display. The REC indi-
cator will light up. Encoding is performing now. (encoding speed is 1:1).
2. Press STOP (12) (6 on remote) to stop recording.
3. The unit will create a folder in the USB device, that contain all recorded tracks.