kiwy S 23 Manual De Instrucciones página 14

Make sure that the diagonal vehicle seat belt section passes over the
child's shoulder, but does not touch his/her neck and through the belt
guide (2).
To reach the right belt position, you can easily adjust the backrest height
by following the operations described (Fig. 3).
FIXING THE CAR SEAT - FROM 22 TO 36 KG
(Application range from 5 to 11 years of age approximately).
Converting to a booster seat
Removing the backrest (Fig. 7 -10)
Your child seat may become a booster seat (Fig. 7). Press and hold down
the backrest adjustment button on the top of the backrest (1). Pull the
backrest up (2) and lift it off the car seat. Store your backrest in a safe
place.
When refitting the backrest hold down the backrest adjustment button
(1). Check that the backrest is correctly fitted by pulling it upwards.
Fitting the seat belt guide to the booster seat (Fig. 11 - 12):
WARNING: The booster seat can be used with or without the
shoulder belt guide.
Once the backrest is removed you will need to fit the seat belt guide to
meet the booster seat. Slot the small buckle on the end of the shoulder
belt guide strap through one of the two sides under the booster seat.
Use the slot closest to the seatbelt buckle when the booster seat is
correctly placed onto the car seat.
Rotate the backrest insert under the booster seat.
Place the booster seat on the appropriate vehicle seat. Ensure the vehicle
seat is upright and adjusted to the rearward position. Press the booster
seat firmly into the vehicle seat.
Place your child into the booster seat. Fasten the vehicle seat belt by
passing the lap strap through the seat belt guides in the armrest.
Pass the diagonal strap through seat belt guide in the armrest nearest
the seat belt buckle.
Pull the seat belt tight by pulling the diagonal section of the seat belt
buckle upwards.
Check to ensure all of the slack has been removed from the seat belt and
6