Electromagnetic Compatibility - Satelec Acteon Mini LED III SuperCharged Manual De Uso

MLED III Supercharged U7
Anomaly observed
No operation
(LCD screen off)
No operation
(LCD screen on)
Light power defect
or no light power
Charger does not operate
Dysfunction of power
level verification
X - ELECTROMAGNETIC COMPATIBILITY
Warning: The charger power cord must be kept apart from those of any nearby devices.
Mini LED SuperCharged requires special precautions to be taken with regard to electromagnetic compatibility. It must
be installed and prepared for use as described in chapter 3.
Certain types of mobile telecommunication devices such as mobile telephones are likely to interfere with the Mini
LED SuperCharged. The recommended separation distances in this paragraph must therefore be complied with.
V6:Mise en page 1
Possible causes
Battery completely discharged
Battery defective
MiniLED defective
MiniLED defective
LED defective and/or dirty
MiniLED defective
Defective buttons
Light guide defective and/or dirty
Reflector defective or dirty
AC power wall outlet defective
AC power adapter defective
Light and/or audible alarms defective
Contact failure on Jack connector socket
Fuse defective
Indicator light defective
Light guide defective and/or dirty
LED defective and/or dirty
Reflector defective and/or dirty
Window defective and/or dirty
14
05/09/2011 09:53 Page 14
Solutions
Recharge battery
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Check cleanliness of verification window and/or
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Clean light guide and/or Return to SATELEC after-
sales department
Clean reflector (dry air jet) and/or Return to
SATELEC after-sales department
Contact your electrician
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Return to SATELEC after-sales department
Clean light guide and/or Return to SATELEC after-
sales department
Clean LED (dry air jet) and/or Return to SATELEC
after-sales department
Clean reflector (dry air jet) and/or Return to
SATELEC after-sales department
Clean window and/or Return to SATELEC after-
sales department