Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Information on the App "Smart Life - Smart Living"
The
Smart Life - Smart Living app is available for android and iOS.
Scan the corresponding QR code to get directly to the download.
NOTE:
Depending on the provider, there may be costs involved in downloading
the app.
Google Play
Information on How to Use the App
This appliance allows you to operate the appliance via your home net-
work. A prerequisite is a permanent Wi-Fi connection to your router and
the free app "Smart Life - Smart Living".
We recommend disconnecting the appliance from the power supply when
you are away from home to prevent unintentional switching on while you
are on the road!
System Requirement for Use of the App
• iOs 8.0 or higher
• Android 4.1 or higher
Commissioning via the App
1. Install the "Smart Life - Smart Living" app. Create a user account.
2. Activate the Wi-Fi function in the settings of your appliance.
3. Place the appliance at a distance of about 5 meters to your router.
4. Press and hold the
button for about 5 seconds. The button will flash
rapidly.
5. Launch the app and select " + ".
6. Select the "air conditioner" menu and follow the instructions on the
display.
7. Once the appliance has been successfully connected, the
lights up. Now you can operate the appliance using the app.
Using the Appliance
Turning Appliance On / Off
• Press the
button to turn on the appliance. The appliance is pre-set
to "Cooling" mode and the temperature is 22 °C. If operation has been
stopped without disconnecting the plug, all previously set operating
mode and temperature settings will be retained.
• Press the
button again to turn off the appliance.
Compressor Safety Appliance
If operation is interrupted, the safety appliance for the compressor is acti-
vated. This prevents operation of the compressor for approx. 3 minutes, in
order to relieve the pressure in the cooling circuit. This is not a malfunc-
tion of the appliance. Therefore, wait at least 3 minutes, before switching
the appliance on again.
38
CL3716_IM_new
Control Panel and Remote Control Buttons
Control
Panel
App Store
The
ual functions.
The buttons on the control panel are explained below.
Operating Mode "Cooling"
In this operation mode, you can adjust the fan speed and the temperature
as desired.
button
NOTE:
To operate the appliance with the compressor, the set temperature must
be lower than the current room temperature.
Operating Mode "Dehumidifying"
• This operating mode does not support any further settings.
• The fan will operate at the lowest speed setting.
• The appliance will cool the room and extract the humidity from the air.
Operating Mode "Fan"
This mode only allows you to set the speed of the fan.
Setting the Temperature
Use the
a temperature between 16 °C and 31 °C.
Setting the Fan
In "Cooling" and "Fan" modes you can set the fan speed with 2 different
settings.
• Button
• Button
"Sleep Mode" (Save Energy)
The appliance is operating in sleep mode. You may only use this mode
when "Cooling" mode is active. In this case, the fan settings cannot be
changed.
Remote
Function
Control
Turn on / off
-
Wi-Fi
Operating mode "Cooling"
Operating mode "Dehumidifying"
Operating mode "Fan"
Fan level 1
Fan level 2
"Sleep mode" (save energy)
Reduce temperature
Increase temperature
Timer operation
Water tank full (This is just an indicator
-
lamp, not a button.)
and
buttons must be pressed several times to select the individ-
or
buttons in "Cooling" mode to set the temperature. Select
= Level 1
= Level 2
13.12.2018
Tabla de contenido
