Makita BO6050 Manual De Instrucciones página 6

Protector
► 1. Protector
The protector prevents the pad, the tool housing and
the wall from being damaged when working near a wall.
Always use the protector when working.
To install the protector, align the tongue of the protector
with the groove, and push in the protector.
To remove the protector, pull the protector forward.
1
► 1. Protector 2. Groove
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Installing side grip
1
► 1. Side grip
Screw the side grip on the tool securely.
The side grip can be installed on either side of the tool.
Installing or removing abrasive disc
CAUTION:
abrasive discs. Never use pressure-sensitive
abrasive discs.
2
► 1. Abrasive disc
To install the abrasive disc or the hook-and-loop type
pad (optional accessory), first remove all dirt and for-
eign matter from the pad.
Then attach the abrasive disc to the pad, using the
hook-and-loop system of the abrasive disc and the pad.
Be careful to align the holes in the abrasive disc with
those in the pad.
To remove the disc from the pad, just pull up from its
edge.
6 ENGLISH
Always use hook-and-loop system
1
1