Installing And Connecting - Airfree E40 Manual De Instrucciones

Plug power cord to the nearest outlet.
Make sure the surface is dry (never place Airfree on wet floor or immerge in water) Make sure
side blue led is on. Switch on dimmer and the anti-stress light should glow from the top lid (1).
After 10 minutes the top lid should be warm.
E60/E80/E125.
Place Airfree on a flat surface not under furniture, shelves, or it under furniture or shelves,
behind curtains as it will reduce air flow and Airfree efficiency in reducing microorganisms.
Place each Airfree® in rooms up to 16m² for E40/P40 or 24m² for E60/P60 or 32m² for E80/
P80 or 50m² for E125/P125 or 60m² for P150 or 22m² for babyair. For larger rooms use
proportionally additional Airfree® units. The use of just one Airfree ® in rooms larger than
recommended will reduce Airfree® efficiency.
Airfree must be continuously on in the same room, 24 hours a day.
Airfree is to be used in rooms with minimum air volume of 330 cu. ft. (10 m3), free of obstacles.
Airfree can be placed in corridors but its air sterilisation effects will not affect adjacent rooms
Do not place Airfree in the corridor to try to reach the whole house. In this case Airfree will only
reduce air pollution in the corridor area.
Airfree shall not be placed near doors or under windows to avoid sterilised air to exit the room.

Installing and Connecting

Anti-stress lights not available in the Airfree E40/
11
E
n
g
l
i
s
h