Function As A Repeater Unit - Velux KLF 100 Manual Del Usuario

Function as a repeater unit

Repeater unit
B
The repeater function extends the operation range of
remote controls in the system by transmitting received RF
commands. When used as a repeater unit, the interface/
repeater unit should therefore be placed approximately
halfway between the remote controls and the products to
be operated.
The repeater function must be registered in remote
controls as if it were a product just as other products, see
section Register products.
Steps 1 and 2 must be completed within ten minutes,
so please read items 1-7 before proceeding.
The example shows how to activate the repeater function
in the interface/repeater unit and register the function in
a VELUX remote control.
Step 1:
1
Press to highlight "Repeater".
Press "Enter" to confirm your choice.
2
The display shows that the repeater function has been
activated.
Press "Continue" to open for registration.
3
The display shows that the repeater function is ready to
be registered in the remote control.
34 VELUX
ENGLISH
A B C D E F G H
FunCTIOn
Interface
Repeater
Reset system
Enter Back
InFORMATIOn
Repeater activated.
Press Continue to
open for registration
Continue Back
InFORMATIOn
Ready for
registration
Back