Interface/Repeater Unit Function And Connection - Velux KLF 100 Manual Del Usuario

Interface/repeater unit function and connection

The interface/repeater unit is used when products are to
be controlled by external control devices.
Individual control of a product or a product group requires
one interface/repeater unit per product or product group.
The entries in the interface/repeater unit must be con-
nected to control devices with dry contacts. When the
dry contact is activated, the interface/repeater unit sends
an RF command to the products to be operated. It is pos-
sible to operate a single product or a group of products.
Function of entries
OPEN/UP/ON is controlled by connecting C and
(2 core wire required).
CLOSE/DOWN/OFF is controlled by connecting C and
(2 core wire required).
C
STOP is controlled by connecting C with both and
(3 core wire required).
Note: Alternatively, a single contact can control both
, and STOP, see section Signal mode.
ENGLISH
14 VELUX