BEVERAGE CENTER CARE
VACATION AND MOVING
Vacation
If you will be away for an extended period of time and do not want to leave
the appliance on while you are gone, prepare it for your absence.
1. Remove all items.
2. Turn the temperature control to the OFF position.
3. Unplug or disconnect power.
4. Clean the interior. See "Cleaning."
5. Clean lid/door gaskets. See "Cleaning."
6. Prop doors open, so air can circulate inside.
Moving
If you are moving your beverage center to a new home, prepare the
appliance for the move.
Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion or fire.
IMPORTANT:
Handle with care when moving to avoid either damaging the refrigerant
tubing or increasing the risk of a leak.
When moving the beverage center, never tilt it more than a 45° angle. If
you do need to tilt it more than 45°or lay the beverage center on its back,
keep it standing over 4 hours before using.
1. Complete vacation preparation steps 1 through 5. See "Vacation."
2. Take out all removable parts, wrap them well, and tape them together so
they don't shift and rattle during the move.
3. Tape the lid/door closed and tape the power cord to the back of the
beverage center.
49-60809 Rev. 2
WARNING
FIRE OR EXPLOSION HAZARD
17