9 Using the wet/dry vacuum cleaner
9 Using the wet/dry vacuum cleaner
9.1
Setting the suction power
The suction power can be set according to the application.
To increase the suction power
► Turn the rotary control counterclockwise.
To reduce the suction power
► Turn the rotary control clockwise.
9.2
Setting the diameter of the suction hose
The rotary control has to be set according to the inside
diameter of the attached suction hose. Setting is necessary
for air velocity monitoring in the suction hose.
► Measure the inside diameter of the suction hose.
0458-660-9621-A
► Set rotary control to the position of the measured inside
diameter.
9.3
Picking up dust and dirt
► If picking up Class M dust:
► Install filter bag or disposal bag.
► Check monitoring of air velocity in the suction hose.
MAX.
MIN.
► Hold the hand tube in one hand and pick up either directly
or via an attached accessory.
9.4
Picking up liquid
► Remove the filter bag or disposal bag.
► Check the float.
► Hold the hand tube in one hand and pick up either directly
or via an attached accessory.
Turn the rotary switch to the I position.
Automatic filter cleaning is switched on.
In order to switch off automatic filter
cleaning: Turn the rotary switch to the
position shown.
Turn the rotary switch to the position
shown.
Automatic filter cleaning is switched off.
English
47