Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
￭ If compressed air is used to clean the wet/dry vacuum
cleaner or the filters, dust which is harmful to health may
be raised and breathed in. Inhaling dust can be harmful to
health and trigger allergic reactions.
► Clean the wet/dry vacuum cleaner and filters as
described in this Instruction Manual.
￭ If the wet/dry vacuum cleaner is not properly serviced or
repaired, parts may not function correctly and safety devices
can be disabled. People can be seriously injured or killed.
►
Do not attempt to service or repair the wet/dry vacuum
cleaner yourself.
► If the connecting cord is faulty or
damaged: Have the connecting cord
replaced by a STIHL servicing dealer.
►
If the wet/dry vacuum cleaner needs to be serviced or
repaired: Contact a STIHL servicing dealer.
5 Preparing the wet/dry vacuum cleaner
for use
5.1
Preparing the wet/dry vacuum cleaner for use
The following steps must be carried out every time before
starting work:
► Make sure that the wet/dry vacuum cleaner and the
connecting cord are in a safe condition, @ 4.6.
► Clean the wet/dry vacuum cleaner, @ 13.1.
► Attach the suction hose, @ 6.4.1.
► Check the filter, @ 8.1.
► Check the cooling air filter, @ 8.2.
► If using an accessory: Fit accessory, @ 6.6.
► Plug the mains plug of the wet/dry vacuum cleaner into an
easily accessible socket.
► If it is not possible to carry out these steps: Do not use the
wet/dry vacuum cleaner. Consult a STIHL servicing
dealer.
40
5 Preparing the wet/dry vacuum cleaner for use
6 Assembling the wet/dry vacuum
cleaner
6.1
Assembling the wet/dry vacuum cleaner
The accessory supplied is inside the cardboard box and
inside the container.
2
1
► Release the container locks (1).
► Lift off the top part (2).
► Remove accessory.
► Replace top part (2) in position.
► Fasten the container locks (1).
Fitting the holder for the connecting cord or the suction hose
T 20
1
► Undo screws (1).
► Fit holder (2).
1
2
2
1
1
0458-660-9621-A
1
Capítulos
Tabla de contenido
