Oursson EM1900 Manual De Instrucciones página 17

Possible problems
Espresso drains off the edges of
the filter holder, but does not flow
out of the holes
Espresso is cold
Pump Noise
Light foam on coffee/Coffee flows
quickly
Dark foam on coffee/Coffee flows
slowly
When preparing cappuccino, milk
foam is poorly formed.
PRODUCT CERTIFICATION
For information on product certification, see http://www.oursson.com or ask seller for a copy.
Specifications
Model
Power consumption, W
Rated voltage
Class of protection against electrical shock
Storage and transportation temperature
Operating temperature from
Humidity Requirements
Dimensions, mm
Weight, kg
*Products should be stored in dry, ventilated warehouses at temperatures below - 25°C.
Only a qualified specialist of an authorized service center OURSSON AG can repair the juice maker.
Possible causes
• Filter holder is incorrectly
installed.
• Filter or filter holder holes are
clogged.
• Coffee machine didn't manage
to warm up and when the coffee
is pouring, the indication flashes
and isn't lit continuously.
• The coffee machine and cups
are not preheated.
• Not enough water in the tank.
• Water tank is incorrectly
installed.
• Ground coffee is poorly pressed.
• Insufficient coffee.
• Coffee is coarse grinded
• Ground coffee is too much
pressed
• Too much coffee.
• The boiler mesh or filter is
clogged.
• Coffee is grinded very fine.
• Milk is warm.
• Steam nozzle is clogged.
Solutions
• Install the filter holder correctly.
• Clean the filter holder and the filter.
• Wait until the indication stops flashing and
start to lit continuously.
• Preheat the coffee machine and cups.
• Add required amount of water into the
tank, above MIN.
• Make sure that the water tank is installed
correctly.
• Press the coffee harder.
• Increase the amount of ground coffee.
• Use finer coffee.
• Do not press the coffee to hard.
• Reduce the amount of coffee.
• Clean the boiler mesh or filter.
• Use coffee with a grind for espresso
coffee machines.
• Use only cold milk from the fridge.
• Clean the steam pipe and nozzle.
EM1900
Max 900
220-240 V~; 50-60 Hz
I
- 25°C to + 35°C
+5°C to + 35°C
15-75% without condensate
234x335x281
3,41
17