Tabla de contenido
Idiomas disponibles
Idiomas disponibles
E
MBROIDERY
You can select from 2 different font styles.
SELECTING EMBROIDERY LETTERS
1. Press the Font button on the Home Screen.
The Font Selection screen will appear.
2. This machine has 2 fonts and each font has 3 sizes.
Press the button for the font you want to sew, and then
press the "✓" button.
The uppercase letter screen will appear.
3. Select the letters you want to embroider.
To change to different types of characters, press the
tab that contains the desired characters, as follows:
a. Uppercase letters
b. Lowercase letters
c. Numeric letters and special letters
4. Selected letter will be added to the top line.
5. The arrow buttons on top line will move the cursor.
6. To insert the letter, move the cursor to the inserting point
and select letter.
To delete the letter, move the cursor to the right side of the
letter to be deleted, then press the delete button (d).
7. When sequence of letters is completed, press the "✓" mark.
The Sewing Screen will appear.
NOTE:
If no letters are selected, the Home Screen will appear.
You can return to letter selecting mode after pressing "✓" mark
by pressing home button.
You can add letters until largest hoop height (If width of
letters exceeds maximum width of hoop, 90 degree rotate
automatically).
4
5
3
a
b
L
ETTERS
1
6
2
d
c
7
EDITING EMBROIDERY LETTERS
Lettering can be edited, similar to the way designs can be
edited.
SEWING EMBROIDERY LETTERS
Sewing embroidery letters works in the same way as sewing a
design.
When stitching lettering, the values appear on screen.
a. Stitches left in current letter / Total number of stitches left
all letters
b. Current letter / Total number of all letters
The machine will stitch each letter, cutting the threads between
each letter.
NOTE: If desired, you can select the Monochrome function (see
page 23) so that all letters will sew without cutting between
each letter, cutting only at the end.
25
a
b
Capítulos
Tabla de contenido
