Camera Menu; Scan Mode - miniland baby digimonitor 3.5 plus Manual Del Usuario

ENGLISH
5.2.7. MAIN MENU
Keep the Menu/Back
and characteristics of your baby monitor.

5.2.7.1. CAMERA MENU

5.2.7.1.1. CHOOSING THE CAMERA
This product is designed to allow the observation of different areas with up to 4 cameras. To
choose the camera you want to see, follow the next steps:
1. Press for 3 seconds the Menu/Back
2. Press the UP
key enter into the sub-menu.
3. Press the UP
press the key.
4. Press the UP
the selection with the
Note 1: You will only be able to select the cameras that have already been paired with the
monitor.
Note 2: There is a faster way to change the camera you are viewing. Directly press
cycle through paired cameras: CAM1 / CAM2 / CAM3 / CAM4 / SCAN MODE.

5.2.7.1.2. SCAN MODE

This function automatically cycles through your paired camera channels to display each
camera for 12 seconds. This function can be used only when you have more than 1 camera
unit paired.
To enter in this mode:
1. Press for 3 seconds the Menu/Back
2. Press the UP
key enter into the sub-menu.
3. Press the UP
press the key.
4. Press the UP
5. Press the key to confirm.
Note 1: When one of the cameras is out of range or is not switch on, the monitor will warn you
and the Scan Mode will stop.
Note 2: The Scan mode can be turned on or off by pressing the
main screen.
5.2.7.1.3. PAIRING CAMERA
This product is designed to allow the observation of different areas with up to 4 cameras
(channels 1, 2, 3 or 4 assigned to different cameras). The monitor and the original camera
leave the factory with channel 1 programmed. If you need to add an extra camera, follow the
process set out below.
button pressed in order to make adjustments to the main functions
key or DOWN key until the camera icon
key or DOWN key until the SEE camera icon
key or DOWN key to select the camera that you want to see and confirm
key.
key or DOWN key until the camera icon
key or DOWN key until the SEE camera icon
key or DOWN key and select the SCAN icon
button and the menu will pop up;
key and the menu will pop up.
32
is highlighted then press the
is highlighted and then
is highlighted then press the
is highlighted and then
.
button while viewing the
key to