Idiomas disponibles
Idiomas disponibles
reAd first !
importAnt sAfety instructions !
The lightning flash represented by the
arrow symbol in an equilateral triangle is
intended to alert users to the presence of
the high voltage within the device which
could cause an electric shock.
1. Read these instructions.
2. Keep these instructions.
3. Take the warnings into consideration
4. Follow all the instructions.
5. Do not use this device around water.
6. Only clean with a dry cloth.
7. Do not obstruct vents.
Install the device following the instructions
provided by the manufacturer.
8. Keep the loudspeakers away from
sources of heat, such as radiators, stoves,
heat register or any other devices which
give off heat (including amplifiers).
9.
Comply
with
power
instructions. The power supply cord has a
plug with two pins, one of which is slightly
wider than the other. A grounded power
supply cord has two pins and an aperture
for the socket's projecting earth pin. The
wider of the two pins and the aperture are
there for your safety. If the power cord plug
doesn't fit your power socket, contact an
electrician and replace the obsolete power
socket.
10. Make sure the power cable can't be
walked upon, squashed or pinched. Pay
close attention to the power plug and the
connection of the cord to the device.
11. Only use accessories recommended by
the manufacturer.
12. Only use fixing devices, stands, tripods,
supports or tables recommended by the
manufacturer or those supplied with the
product.
If using a trolley or cart, pay particular
attention when moving the equipment to
avoid any risk of damage or injury.
13. Disconnect the device in the event of
lightening or when the device won't be
used for long periods of time.
Caution: To avoid any risk of electric shock,
do not dismantle the top (or the rear)
of this device. None of the components
are to be replaced by the user. For any
maintenance or repairs, please contact a
qualified professional.
14. All maintenance must be carried out
by a qualified professional. Maintenance is
necessary if any damage has been caused
to the device, such as a damaged power
cord or plug, damage due to liquid spilt
on the device or objects inserted into the
device, exposure to rain or humidity, a
malfunction or physical damage.
15.
Do
recommended by the manufacturer to
prevent any risk of damage or injury.
16. This product must only be connected to
the type of power supply indicated on the
cord
safety
device. In case of doubt about your electric
installation, contact the retailer of the
product or your electricity provider. For
devices intended for using with batteries
or other power sources, refer to the user
manual.
not
use
accessories
The exclamation mark represented in
an equilateral triangle is intended to
alert users to the existence of important
instructions in the user manual relating to
the use and maintenance of the device.
19. Never overload your power sockets,
extension cord or multi-plugs. This may
lead to fire or electric shock.
20. Never insert an object into the vents on
the device. It may come into contact with
high-voltage components or cause a short
circuit which may lead to fire or electric
shock. Never get liquid on the device.
not
21. Never try to repair this device yourself;
opening the device may expose you to
high-voltages and other risks. For any
maintenance or repairs, contact a qualified
professional.
22.
When
it's
necessary
components, make sure the technician
uses the components specified by the
manufacturer or ones which have exactly
the same characteristics as the original.
Components which aren't compliant may
cause a fire, an electric shock or other
accidents.
23. After any repairs or an intervention
on the device, ask the technician to test
the equipment in order to check that the
product works correctly and is safe.
24. The device must not be mounted to
a wall or ceiling unless intended by the
manufacturer.
25. The power cable at the back of the
subwoofer enables the equipment to be
disconnected from the power supply.
The plug socket must always be accessible.
26. Never expose the product to drops or
splashes of water.
GB
to
replace
