Focal CUB EVO Manual De Uso página 20

Cub Evo
user manual
Please validate your Focal-JMlab warranty
by registering your product online: www.focal.com/warranty
A - Specifications
8" (21cm) subwoofer: polyflex cone.
class d amplifier: for very high power and high-quality sound.
phase inverter: for optimising the phase of the subwoofer and loudspeakers.
timed automatic power-on/stand-by: automatically turns the amplifier on and off.
smooth break-up protection: prevents saturation.
low-level stereo inputs: rcA inputs.
lfe input on rcA left: direct mono input to connect to the "subwoofer" output of the home cinema
amplifiers.
mdf cabinet: a rigid cabinet without resonance.
profiled port: powerful bass without distortion.
b - Connections
on low-level rcA inputs:
When using a 2-channel amplifier with "pre-out" line outputs, cub evo should be connected to the rcA
stereo inputs "line inputs right (r)/left (l)" (fig. A).
on lfe input:
When a multi-channel audio/video amplifier is used, cub evo's single lfe input should be connected to
the audio/video amplifier's "subwoofer" output (fig. B).
C - Switching on/off
cub evo features a timed automatic power-on/stand-by function with an automatic audio signal detection
system. When the "power" switch is on "Auto", the subwoofer will turn on as soon as an audio signal
input is detected. When switched to "power on", the audio signal detection system is disabled and the
subwoofer will stay on permanently.
on the other hand, when no audio signal is detected for approximately 20 minutes, the detection system
will automatically switch the subwoofer into stand-by mode.
if the subwoofer is going to be left unused for several days, it is recommended to set the "power" switch
to "off".
English