Maintenance And Service; Maintenance And Cleaning - Bosch PLL 5 Instrucciones De Servicio

Downloaded from Elcodis.com electronic components distributor
OBJ_BUCH-311-004.book Page 22 Wednesday, March 14, 2007 4:38 PM
For all four fastening methods, pay attention that the wall holder 1 is
fastened securely to the structural surface. Faulty measurements
can result when the wall holder slips away.
Attach the measuring tool via the magnets 14 onto the metal plate 3
of the wall holder 1.
Belt Clip
With the belt clip 5, the measuring tool, as an example, can be
hooked to a belt and is always at hand.

Maintenance and Service

Maintenance and Cleaning

Check the measuring tool each time before using. In case
of visible damage or loose components in the interior of the
measuring tool, the safe function is no longer ensured.
Keep the measuring tool clean and dry at all times to ensure proper
and safe working.
Wipe off debris using a moist and soft cloth. Do not use any clean-
ing agents or solvents.
If the measuring tool should fail despite the care taken in manufac-
turing and testing procedures, repair should be carried out by an
authorized after-sales service centre for Bosch power tools.
In all correspondence and spare parts orders, please always include
the 10-digit article number given on the type plate of the measuring
tool.
22 | English
1 609 929 L40 • 14.3.07