Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Requirements for the installation location
For safe and flawless operation of the unit, the
place of location must meet these prerequisites:
The unit must be set up on a firm, flat, level and
non-slip base that has sufficient load bearing
capacity.
Select the place of location so that children
cannot reach the sharp blade in the unit.
Sources of hazards
The rotating blade can cut off body parts. Your
fingers, especially the thumbs, are endangered.
For this reason, never reach into the space
between the stop plate and the holder for the
material to be sliced as long as the stop plate
is not completely closed, i.e., is placed below
"0".
Cutting
Swivel the machine feet out as far as they go
●
●
(1.1).
Push the slider on the underside of the
●
●
carriage together and turn the carriage over
(2.1).
Put the thumb protection into a horizontal
●
●
position (2.2).
Place the cutting goods on the carriage.
●
●
Adjust the desired cutting width by turning
●
●
the hand wheel (3.2).
Push
the
needed
●
●
„Permanent" (3.1).
Press the cutting goods gently against the
●
●
stopper plate and lead the carraige evenly
against the blade (3.3).
After finishing the cutting process, turn off
●
●
the appliance (3.1).
Push the button on the side of the thumb
●
●
protection and flip it (6.1).
Push the slider on the underside of the
●
●
carriage together and flip it (6.2).
Important: Let the engine cool off after a
permanent usage of approx. 5 minutes.
switch
„Pulse"
or
DE
EN
FR
ES
IT
NL
Pyc
17
Capítulos
Tabla de contenido
