Clatronic PM 2658 Instrucciones De Servicio página 19

Ocultar thumbs Ver también para PM 2658:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
• If you wish to add salt or butter to your popcorn, do so once the
popcorn is ready and has been removed from the appliance!
• Make sure that the lid, the basis appliance and the measuring bea-
ker are assembled correctly!
• Do not operate the device with an external timer or separate re-
mote control system.
• Leave the appliance to cool for at least 10 minutes before using it
again.
• Let the appliance cool down completely before cleaning or storing.
• Do not try to repair the appliance on your own. Always contact an
authorized technician. To avoid the exposure to danger, always
have a faulty cable be replaced only by the manufacturer, by our
customer service or by a qualified person and with a cable of the
same type.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
unless they are older 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than 8
years.
Before using the first time
The following instructions need to be followed only when using
the appliance for the first time after removing it from the pack-
ing:
• Clean the transparent lid and the measuring beaker with a
moist cloth.
• Place the appliance on a non-slip and level surface.
• Place the transparent lid on the appliance.
• Insert the measuring beaker in the opening in the top of the
transparent lid.
• Insert the plug into a duly installed protective contact socket
and switch on the appliance. Make it work for about 3 min-
utes without any ingredients in it to eliminate any impurities
that may be present in the appliance!
• Then leave the appliance to cool for 10 minutes! The appli-
ance is now ready for use!
19
Tabla de contenido
loading

Tabla de contenido