Connecting The Antennas - RCA RT2781BE Manual De Usuario

Connections and Setup
Connecting to Audio Components
Digital Audio in Connection
Digital Input
Connect components, such as DVD players, Satellite receiver/Cable boxes, BD
(Blu-ray Disc ) players or TVs, capable of outputting Dolby Digital (Surround
TM
Sound) or standard PCM (Stereo) format digital signals.
Note: "Blu-ray Disc" is a trademark of Blu-ray Disc Association.
Digital Connection
The digital audio jacks can accept Dolby Digital (Surround Sound) or PCM
(Stereo) signals when compatible components are connected.
• This unit provides two optical and one coaxial digital input jacks for the
connection of your components that have digital audio outputs.
• To connect DVD player, Satellite receiver, Cable box, Blu-ray player or TV that
has a digital audio output, use a coaxial digital (not included) or an optical
digital cable (not included) to carry the audio signal and enjoy Dolby Digital
sound quality.
• A separate optical or coaxial cable is needed for each digital connection.
Blu-ray player
Satellite receiver
DVD player

Connecting the Antennas

Connect the AM and FM antennas to the AM and FM terminals on the system's back panel.
They must be hooked up in order to receive clear reception. For FM reception, extend antenna to its full length. For AM reception, rotate the
antenna horizontally to get better reception.
BD/DVD/SAT-CABLE/TV/LINE-IN
Optical Digital In (Audio)
Connect to optical digital output of Cable box, Satellite receiver,
DVD, Blu-ray player, TV or other compatible devices using the
Optical Fiber Cable (not included).
BD/DVD/SAT-CABLE/TV/LINE-IN
Coaxial Digital In (Audio)
Connect to coaxial digital output of DVD, Cable box, Satellite
receiver, TV or other compatible devices using the Coaxial Digital
Cable (not included).
BD/DVD/SAT-CABLE/TV/LINE-IN
- 3 -
Analog Audio Signals
OR
O
Notes:
• If your TV has digital audio output, you can
connect it to the corresponding digital audio
input of the system instead of using analog
connection.
• Optical and coaxial cables carry only the audio
portion of the signal.
Analog Audio Signals
EN