Cleaning And Care - OK. OPD 910 Manual De Instrucciones

CLEANING AND CARE

• Unplug the DVD player before cleaning.
• Clean the DVD player with a soft cloth. Never use substances such as alcohol, chemicals or household
cleaners on the DVD player.
• To avoid deformations and color fading, wipe off water drops as soon as possible.
TROUBLESHOOTING
If there are any problems during operation, please refer to the following table. If problems cannot be
solved as indicated under Solution, please contact your manufacturer.
Symptom
No picture or sound
Poor picture or sound
BAD DISC displayed
Remote not working
Unit not working
NO DISC displayed
IM_OPD910_161214_V03_HR.indb 31
31
Possible Causes and what you should do
• Ensure the power button is on.
• Ensure the power outlet is operational.
• Ensure the power cord is not damaged.
• Ensure the power plug is connected firmly to the outlet.
• Ensure you have set the player's AUDIO settings correctly.
• Ensure the disc is not scratched or stained.
• Ensure the disc is not warped, damaged or deformed.
• Ensure the disc is not badly stained or damaged.
• Ensure the disc format is compatible with the player.
• Please check whether you have tried to play a software CD. If so,
please restart the player.
• Make sure the Main units POWER button is on.
• Ensure the remote battery are working.
• Point the remote control directly at the player's IR sensor.
• Remove any obstacles between the remote and the IR sensor.
• Turn off the power, and then turn it on again.
• Ensure you have put the disc on the tray.
• Ensure the disc is not upside down.
• Ensure the disc is not distorted, stained or scratched.
EN
14/12/16 5:46 PM