OK. OPD 910 Manual De Instrucciones página 23

CONGRATULATIONS
Thanks for your purchase of an ok. product. Please read this manual carefully and keep it for future
reference.
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
1. For safety reasons, this class II device is provided with double or reinforced insulation as
indicated by this symbol.
2. The lightning flash with arrowhead within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" inside the enclosure of this device, which
may be of sufficient magnitude to constitute a risk of electric shock to persons.
3. The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance instructions in the literature
accompanying this device.
4. DANGER! Invisible laser radiation when open and safety interlock failed or defeated. Avoid
direct exposure to the beam. Do not touch the lens.
For household use only. Do not use outdoors.
5.
DANGER! Excessive sound pressure from earphones and headphones can cause hearing loss.
6.
If you listen to loud music for a long time, your hearing may be impaired. Set to a moderate
volume.
Danger of suffocation! Keep all packaging material away from children.
7.
8. Only use under normal room temperature and humidity conditions.
The product is only suitable for use at moderate degrees of latitude. Do not use in the tropics or in
9.
particularly humid climates.
Do not move the product from cold into warm places and vice versa. Condensation can cause
10.
damage to the product and electrical parts.
11. Do not use attachments or accessories other than recommended by the manufacturer or sold with
this product. Install in accordance with this user manual.
12. When installing the product, leave sufficient space for ventilation. Do not install in bookcases, built-
in cabinets or of the sort.
13. Do not impede ventilation by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc. Do not insert any objects.
14. Do not install near any heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
15. Do not shift or move the product when powered on.
Do not touch, push or rub the surface of the product with any sharp or hard objects.
16.
Danger! To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
17.
The product shall not be exposed to dripping or splashing and no objects filled with liquids, such as
18.
vases, shall be placed on the product.
Care should be taken so that no objects or liquids enter the enclosure through openings.
19.
20. No naked flame sources, such as lighted candles, should be placed on the product.
Refer all servicing to authorised service agent. Do not attempt to repair the product yourself.
21.
Servicing is required when the product has been damaged in any way, such as the supply cord or
plug are damaged, liquid has been spilled, objects have fallen into the product, the enclosure is
damaged, the product has been exposed to rain or moisture, does not operate normally, or has
been dropped.
22. Before connecting the product to a socket outlet, make sure the voltage indicated on the product
corresponds to your local mains.
23. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
similarly qualified person in order to avoid hazard.
24. Regularly check if the supply cord, product or extension cable is defective. If found defective, do
not put the product into operation. Immediately pull the plug.
25. Place the supply cord and, if necessary, an appropriate extension cable in such away that pulling or
tripping over it is impossible. Do not allow the supply cord to hang down within easy reach.
26. Do not jam, bend or pull the supply cord over sharp edges.
27. Only use the provided adaptor.
IM_OPD910_161214_V03_HR.indb 23
23
EN
14/12/16 5:46 PM