Burner Rotation - Whirlpool SF315PEK Guía Para El Uso Y Cuidado

To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the burner cap from the burner base and clean
according to "General Cleaning" section.
2. Clean the gas tube opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do
not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a
trained repair specialist.
4.
Replace the burner cap, making sure that alignment pins are
properly aligned with the burner cap.
5=
1. Incorrect
2. Correct
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
The right side burners can be rotated 180 ° to reduce the distance
between the front and back burners. This permits better heat
distribution when using oblong pans or griddles.
To Rotate Burners:
1. Make sure burners are cool before beginning rotation.
2. Remove right side grates and burner caps.
3. Lift burners from cooktop, as shown.
4.
Rotate burners 180 °, as shown.
I
I I
I
I
I
I
I
I
5. Replace burners, with large hole over gas tube opening, and
small hole over the ignitor. See "Sealed Surface Burners"
section for burner parts descriptions. Push burner down,
flush with cooktop.
6. Replace burner caps and grates.