OK. OTF 153-W Manual De Instrucciones página 13

COMPONENTS
A. Front guard
B. Fan blade
C. Rear guard
D. Control switch II O I
E. Motor unit
F. Power cord
G. Thumb screw
H. Base
I. Screw
BEFORE FIRST TIME USE
• Remove the product and accessories carefully from the original packaging. It is recommended to keep
the original packaging for storage. If you wish to dispose of the original packaging, please observe
applicable legal provisions. Should you have any questions regarding proper disposal, contact your
local waste management center.
• Inspect the delivery contents for completeness and damages. Should the delivery contents be
incomplete or damaged, contact your sales outlet immediately.
• After unpacking, please refer to chapter Cleaning and care.
INSTALLATION
1 Use the thumb screw to attach the motor housing at the desired angle.
Caution
• The product may only be connected to the mains once it has been completely assembled.
• The appliance must not be disassembled during operation, general care, cleaning and user
maintenance.
• The product may never be operated without the stand or in a horizontal position.
Note
Switch off and disconnect the product before adjusting the angle.
OPERATION
2 Plug in the product.
To switch the appliance on, turn selector to II (high speed) or I (low speed). To switch it off, turn
3
selector to O.
Unplug if it is not used for some time.
4
Caution
• The guard must be completely closed when operating the product.
• During operation, do not put fingers or other objects in the guard.
IM_OTF153-W-W_151029_V02_HR.indb 13
13
EN
29/10/15 3:43 PM