Thermal Cut-Out Reset; Emptying The Appliance - Buffalo GL346 Manual De Instrucciones

UK
Note: Once the water temperature drops 5-10ºC then the appliance will reheat
the water.
WARNING: If the Temperature Control Knob is set to or close to 'HIGH' then
the appliance will constantly heat the water until knob is turned to 'OFF" or the
temperature is reduced.

Thermal Cut-Out Reset

This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels
the appliance will automatically cut power.
The Safety Cut-out switch is located on the underside of the appliance. To reset the appliance:
1. Empty the appliance and allow to cool.
2. Press the reset button until it clicks.
WARNING: Ensure the appliance has cooled down and is empty before resetting
the switch, as it may need to be tipped slightly to gain access to the switch.
3. The appliance is now reset and can be used as normal.
Serving
1. Place a suitable vessel beneath the tap.
2. Pull the tap towards you or push tap away from you to begin pouring.
3. Raise the tap handle to close the tap.

Emptying the Appliance

Drain the appliance by using the tap to empty.
4
GL346-GL349_ML_A5_v4_20190628.indb 4 2019/6/28 17:14