System Layout - SmartPool SUNHEATER S601 Manual De Instalación Y Operación

CAUTION: Unless you are familiar with working on roofs and have the proper ladders and safety equipment for such work, you CAUTION:
should hire someone with the necessary experience to do the installation. Failure to observe safe practices on a roof
or other elevated structure may result in falling, leading to serious injury to you.
Required:
• Flathead screwdriver or 5/16" nut driver
• Power Drill
• 1/8" drill bit and Phillips head bit
• Silicone sealant (GE II or equivalent)
Vacuum Relief
End Cap
Pipe
Adapter
Pump
Cool Water Feed

SYSTEM LAYOUT

28" hole
center to
hole center
FEED TO SOLAR
Check Valve
Filter
• Enough 1 1/2" Schedule 40 PVC pipe
for the plumbing going to and from your
pool equipment and fittings.
• PVC Primer and Glue
3-Way Valve
Warm Water Return
4
Pipe adapter
Rubber End Cap