Functions With Ptt Switch - PRESIDENT RICHARD Manual Del Usuario

The default tape names are:
on page 28.
See § BAND page 23.
12) SPAN
When the function is active, the frequency can be
A short press on the PUSH knob (6) makes one of the decimals of the fre-
quency blink. 1. Press several times to select the desired decimal. 2 Turn
the rotary PUSH knob (6) or use the UP/DN buttons (18) on the microphone
increase/decrease
to the frequency continuously with the channel and
band.
Press the PUSH knob (6) for 3 seconds to
1. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
phone to select the SPAN function.
2. Press the PUSH knob (6). The current setting flashes in the display.
3. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
phone to activate On / deactivate
4. New press on the PUSH knob (6) to validate. The parameter stops blinking.
a) Go back to point 1 to adjust
(17) to validate and exit MENU.
5. exits
If no key is pressed, the unit
the display.
Note: The last two digits of the frequency may blink if it does not exactly
match with the frequency of the displayed channel.
The default SPAN setting is On.
13) ECHO SET
Press the PUSH knob (6) for 3 seconds to
1. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
phone to select the ECHO function.
2. Press the PUSH knob (6). Dy and the delay value blink on the display.
3. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
set
phone to the delay value from 1 to 32 (default value is 32).
4. New press on the PUSH knob (6) to validate. The delay stops flashing. TI and
the value of the second parameter, time, blink on the display.
5. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
phone to set the time value from 1 to 32 (default value is 32).
6. New press on the PUSH knob (6) to validate. The time stops flashing. a) Go
back to point 1 to adjust another function or b) Press the PTT switch (17) to
validate exit MENU.
and disappears.
7. If no key is pressed, the unit exits
the display.
. See the RESET menu
adjusted continuously.
enter MENU. appears.
Of the SPAN function.
another function or b) Press the PTT switch
disappears.
MENU after 10 seconds,
disappears on
enter MENU.
appears.
MENU after 10 seconds, disappears on
See § ECHO page 20.
14) RESET
Re-initialize band names or all user-defined settings and return to default
values.
Press the PUSH knob (6) for 3 seconds to
1. Turn the rotary PUSH knob (6) or use the UP/DN buttons (18) on the micro-
select the RESET function.
phone to
2. Press the PUSH knob (6). The current setting flashes in the display.
3. Turn the rotary PUSH knob (6) or use the microphone UP/DN buttons (18) on
select
the microphone to
4. Pressing the PUSH knob (6) again
MENU.
disappears from the display
5. If no key is pressed, the unit exits MENU after 10 seconds,
the display.
RESET ba allows to reset the name of the default bands. See the menu BAND
NAME menu on page 27.
RESET AL restores all factory settings.
D) FUNCTIONS WITH PTT SWITCH
1) TALKBACK
This function allows you to hear your own modulation in the optional internal
or external speaker connected to the EXT.SP jack (C).
Press and hold the PTT switch (17) then press the BAND key (9) to
the TALKBACK function.
/deactivate
When the function is active, "TALKBACK" blinks on the display for 3 seconds,
displaying the current level of the TALKBACK and then remains permanently
displayed.
2) TALKBACK LEVEL
This function allows to adjust the volume level of the TALKBACK.
1. Activate the TALKBACK function.
2. Press and hold the PTT switch (17) then turn the rotary PUSH knob (6) to
increase decrease
(clockwise) /
the TALKBACK.
3. Release the PTT switch (17).
28
enter MENU.
appears.
ba (BAND) or AL (ALL).
resets the selected option. The unit
disappears from
(counterclockwise) the volume level of
exits
activate