Cleaning And Maintenance - Imetec SM3 900 Instrucciones De Uso

WARNING! Risk of burns. DO NOT move the appliance while
it is in operation.
• Wait until the green ready to use light is ON.
• Remove the plate closure hook [Fig. C].
• Open the cover by lifting it with the handle [Fig. D].
• Place the food on the bottom plate and close the cover.
• When cooked, open the cover and remove the food using tongs, taking care not to scratch
the plates.
• Place the switch in the OFF position.
WARNING! Always disconnect the appliance from the socket
before cleaning or performing maintenance.
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
• Wash the bottom and top plates with a damp and well-wrung sponge.
• Wipe the exterior of the toaster/grill with a damp but thoroughly squeezed sponge.
• Dry with a dry cloth.
• DO NOT use abrasive sponges or sharp tools to avoid damaging the non-stick coating.
Should one of the following problems occur, implement the proposed solution:
PROBLEM
The appliance will not switch on.
The packaging of the appliance is made of recyclable materials. Dispose of the
packaging in accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the crossed bin symbol on the appliance or its packaging indicates that the
appliance must be disposed of separately from other waste at the end of its useful
life.
The user must therefore take the appliance to an appropriate recycling centre
for electrical and electronic equipment. Alternatively, instead of handling the
disposal, the user can hand over the appliance to the retailer when a new, equivalent one
is purchased. The user can hand over electronic products measuring less than 25 cm to
retailers of electronic products having a sales area of at least 400 m
with no obligation to buy. Appropriate separate collection for the subsequent procedure for
the decommissioned appliance for recycling, which includes treatment and environmentally

CLEANING AND MAINTENANCE

TROUBLESHOOTING
Check that the plug is connected to the mains
supply.
Check that the O/I switch is in the ON position.
DISPOSAL
SOLUTION
free of charge and
2
EN
13