Connecting The Ac Adaptor - Schimmel TwinTone Pianos 5.01 Instrucciones Para El Uso

Attaching the Headphones Hanger
Attach the hanger to the underside of the control unit
with the two screws supplied.
Setting the Auto Power-off Function
You can turn the power off automatically if you do not operate the unit for 30 minutes.
Set the AUTO OFF MODE switch at
the bottom of the control unit.
ON: Activates the auto power-off function. The
unit is automatically turned off if you do
not operate it for 30 minutes. While the
auto power-off function is activated, turn
the power off and on again with the
POWER switch.
OFF: Inactivates the auto power-off function. Use
the POWER switch to turn the power off.
Note
If you turn the power on while the AUTO OFF MODE
switch is set to OFF, the PLAY/STOP lamp on the front
of the control unit lights up for 2 seconds.
6
■ For Upright Pianos
Screwdriver
■ For Grand Pianos
Caution
• Use the Schimmel Pianos PA-150 AC adaptor, or an equivalent recommended by Schimmel Pianos. Use of other AC
• Do not stretch the cord or bend its ends.
• Do not attempt to use the cord if it is stretched or if the ends of the cord have been bent. Attempting to do so may
• Always turn off the main unit power before disconnecting the AC adaptor.
• When you wish to move the piano, unplug the AC adaptor from the AC outlet and disconnect it from the DC12V
• Unplug the AC adaptor from the AC outlet if you do not intend to use the instrument for an extended period of time.

Connecting the AC Adaptor

1
Connect the AC adaptor to the
DC12V jack at the rear of the
piano.
2
Loop the cord through the hook
on the piano, as shown.
3
Connect the AC adaptor to the
AC wall outlet.
1
Connect the AC adaptor to the DC
IN 12V jack at the rear of the
control unit.
2
Connect the AC adaptor to the
AC wall outlet.
adaptors may result in damage, overheating, or fire.
cause interruptions to the power supply.
jack at the rear of the piano, or the DC IN 12V jack at the rear of the control unit before proceeding.
DC12V
1
3
2
DC IN 12V
7